From the launch of the Twin Towers, now called the TT, Pathos acoustics’ designs are sought after my enthusiasts and all share Pathos’s  unconventional approach that results in  musical and beautiful to look at pieces.  

The most accessible Pathos product is completely new today. The Classic One project was initially developed and promoted with the aim of making “all Pathos quality available at a budget price”.

As the thousands of specimens sold all over the world testify, this concept has been well understood and appreciated by audiophiles.

The review of the Classic One project was carried out in parallel with the development of the integrated Logos and therefore benefits from many of the design achievements achieved for this latest Pathos model

  • Type Integrated amplifier in Class A / AB, hybrid circuit with input tube stage, bridgeable
  • Power output 2 x 70W @ 8 Ohm, 2 x 135W @ 4 Ohm, 180W in bridged mode (mono)
  • Inputs 1 balanced XLR4 unbalanced RCA
  • Frequency response 2Hz à · 100kHz
  • THD <0.05%
  • Signal / noise ratio 90dB
  • Input impedance 100kOhm

Presented during the edition of the Monaco High-End 2014, the new integrated amplifier of Pathos Acoustics was born from the desire of the Vicentina company to profoundly renew one of the greatest international successes in its history or the acclaimed and award-winning ClassicOne amplifier that will however remain in the its catalog. But in the act of thinking about the new ClassicRemix, the company became aware that renewal could not be separated from a new and more ambitious market positioning. In fact, the mission entrusted to ClassicRemix is ​​to respond to the increasingly demanding expectations of the audiophile public and at the same time meet the attention of young people and those who are “simply” in love with music.

TECHNOLOGY AND DESIGN
The Pathos Laboratories have worked hard so that the new ClassicRemix has all the technology necessary to achieve the goal that the company had set itself with this device, namely: very high sound performances, excellent management of liquid music and listening to high quality with headphones.

  • Type   Integrated stereo amplifier, fully balanced, Hybrid technology
  • Stage preamplifier  Tube (2×6922 ECC88)
  • Final stage    solid stade, bridge mode, class AB
  • Power output   2×70 W RMS @ 8 Ω (Both channel driven)
  • Frequency response 1.5Hz – 200KHz ± 0.5dB
  • Max input voltage  4,25VRMS
  • Input sensitivity 500m VRMS
  • Input impedance  47K Ω
  • Output polarity  Non-inverting. Balanced pin 2 +
  • Volume regulator  2 x Burr Brown PGA2310 (180 steps 0,5dB)
  • THD 0.025% @ 70W
  • S / N Ratio  > 100dB
  • Power requirements 250W @ 70W PC / 100W @ zero volume / <0.5W @ standby
  • Analogue inputs      1 balanced XRL
  • 4 unbalanced RCA
  • Digital inputs Installation of (optional) HiDac Mk2 board is required to enable these inputs
  • 1 USB port type “B”, 1 SPDIF coaxial, 1 SPDIF optical
  • Outputs 1 Pre out stereo line
  • 1 connector for jack headphone 6.3mm
  • Headpone Specifications 
  • Output power   1.6W @ 32 Ω
  • Output impedance  10 Ω
  • Max output level  10 V RMS
  • Frequency response  1.5Hz – 200KHz ± 0.5dB
  • THD   0.025%
  • Dimensions
  • Amplifier    37cm (D) x 280cm (W) x 170cm (H)
  • Packed       490cm (D) x 430cm (W) x 300cm (H)
  • Weight (net / packed)  14Kg / 17.5 Kg
logos.5

Pathos Acoustics faithful to the spirit that has animated it since its inception has always been committed to the search for new solutions and the refinement of its music machines.

It is with this approach that Pathos after more than ten years from the introduction of the integrated amplifier Pathos Logos presents its MKII evolution.

Pathos does not usually introduce updated versions of its models except in the presence of substantial and significant innovations to be offered to its loyal customers and in general to all lovers of good music.

In fact, behind the usual original design, the new Logos MKII conceals the introduction of a series of new solutions, some designed to further improve the sound of the amplifier and others to meet the demand for versatility and practicality that a demanding clientele also demands. from a high-end appliance.

  • Type Integrated stereo amplifier, Hybrid technology. Preamplifier stage Tube (2×6922 ECC88), class A Final stage; Mosfet, class AB
  • Power output 2×110 W RMS @ 8Ohm (Both channel driven)
  • Frequency response 5Hz – 140KHz ± 0.5dB
  • Max input voltage 6V RMS
  • Input sensitivity 500mV RMS (39dB Gain)
  • Input impedance 32KOhm unbalanced, 20KOhm balanced
  • Output polarity Non-inverting. Balanced pin 2 +
  • Volume regulator Burr Brown PGA2310 (100 steps)
  • Dumping Factor 360 @ 8Ohm
  • THD 02% @ 1W; 0.2% @ 110W
  • S / N Ratio > 90dB
  • Power requirements 200W @ 100WPC / 130W @ zero volume <0.5W @ standby
  • Connections
  • Analogue inputs 2 balanced XRL line, 5 unbalanced RCA line
  • Digital inputs Installation of (optional) HiDac board is required to enable these inputs
  • 1 USB port type “B”, 2 SPDIF coaxial
  • Drivers Available for Windows (up to version 8) and Mac OSx (up to 10.09);
  • for later versions the optional HiFace M2Tech adapter is required
  • Outputs 1 stereo line out, 1 mono line out
  • Dimensions
  • Amplifier 420mm (D) x 430mm (W) x 170mm (H)
  • Packed 600mm (D) x 600mm (W) x 350mm (H)
  • Weight (net / packed) 28Kg / 30Kg

Pathos’ debut on the hi-fi stage has certainly not gone unnoticed: in a short time since its debut, the TT has earned a solid place in that limited number of products that contribute to writing the history of High Fidelity.

International audio critics welcomed the first Pathos product with covers, enthusiastic comments and numerous prestigious awards.

Listening to music played with a TT, anyone can perceive a substantial “difference” – compared to everything previously heard – in terms of musicality, transparency and absence of listening fatigue.

The reason why this difference can be clearly and immediately perceived is that the TT is different.

This difference has a name, INPOL®, the patented circuit all over the world which, according to critics, constitutes the most important innovation in the field of amplification in recent years.

InPol (INmplexer Linear POmpa) is a patented system by Pathos acoustics that has been very successful and has earned many awards.

The InPol devices have a sonic personality not otherwise obtainable thanks to
this particular circuitry, completely balanced in class A that uses a single solid state component in a tracker configuration, with a high current gain and a unitary voltage gain.

The valve amplifier amplifies the input signal voltage and InPol supplies the current for driving the speakers without further amplification; in this way the signal is conveyed by the valves and turns out to be a real copy of the original with all the original quality, purity and harmonic contents.

This technology allows to double the theoretical efficiency of the pure class A from 25% to 50% and to obtain a low output impedance, which is fundamental for the damping coefficient further improved by the double InPol.

Type   integrated amplifier operating in pure class A

according to INPOL®circuitry

  • Power output 2 X 35 W @ 8 Ω
  • Feedback absent
  • Frequency response 13 Hz ÷ 78 kHz ± 0.5 dB
  • THD <0.5% up to the maximum power
  • Signal / noise ratio 90 db
  • Slew rate 38 volts / μs
  • Input impedance 100 KΩ
  • Absorption at rest 240 W

IConverto Mk2 is a high performance DAC pre amplifier, built with selected components of the highest quality, which allows to satisfy the requests of music lovers who want to get the best from their digital source totally manageable from its application for smartphones and tablets.

It supports a fully balanced circuit and provides suitable input options, such as S / PDIF coaxial, S / PDIF optics, USB type B and analog RCA line.

Inside there is an integrated amplifier that has been designed for headphone lovers. It has a very elegant structure in its simplicity.

  • Digital input sample rate S / PDIF 32bit up to 384 KHz
  • USB from Pc – PCM 32bit up to 384kHz, DSD
  • 64, DSD128
  • Analog stage Fully balanced, class A, zero feedback
  • Dynamic range 120dB
  • S / N Ratio -110dB
  • THD <0.01%
  • Analog output 1x Balanced XLR, 1x Unbalanced RCA line
  • Output impedance <30 Ohm
  • Max FIX output level 3.2 V RMS
  • Variable output level 0 – 6.3 V RMS
  • Inputs 2x USB type “B” connector for computer
  • 1x digital S / PDIF RCA
  • 1x digital S / PDIF optic toslink
  • 1x analog stereo line RCA
  • Headphone specifications
  • Power output 1W @ 16 Ohm
  • Output impedance <0.2 Ohm
  • Output level 7 VRMS
  • Frequency response 10Hz – 100 KHz
  • THD <0.02%
  • Main voltage 90-250V 50 / 60Hz
  • Power consumption 10W
  • Dimensions 200 x 226 x 70 mm
  • Net weight 2kg

InPolEar is a headphone amplifier, integrated in Pure Class A with the latest fully balanced double InPol. The valve / headphone combination combines the very high quality of the sound produced by the valves with the low power requirement typical of headphones. Listening on headphones with this amplifier is a journey to discover the richness of the sound produced by Inpol capable of guaranteeing a great high-end extension and an incisive character with its two balanced outputs 10 W @ 16 Ohm and 1 unbalanced 6 W @ 16 ohms.

For its circuitry it is an excellent valve pre-amplifier with a fully balanced differential circuit.

InPol (INmplexer Linear POmpa) is a patented system by Pathos acoustics that has been very successful and has received many awards. The InPol devices have a sonic personality not otherwise obtainable thanks to this particular circuitry, completely balanced in class A, which uses a single solid state component in a tracker configuration, with a high current gain and a unitary voltage gain. The valve amplifier amplifies the input signal voltage and InPol supplies the current for driving the speakers without further amplification; in this way the signal is conveyed by the valves and turns out to be a real copy of the original with all the original quality, purity and harmonic contents.

This technology allows to double the theoretical efficiency of the pure class A from 25% to 50% and to obtain a low output impedance, which is fundamental for the damping coefficient further improved by the double InPol.

  • Reference stereo integrated amplifier for headphone Pure class A double INPOL
  • technlogy -fully balanced and preamplifier
  • Output power (impedance, balanced and unbalanced)
  • 32 Ω 3W        10W
  • 50 Ω 9W    6,4W
  • 120 Ω 800mW 2,7W
  • 300 Ω 320MW 1W
  • 600 Ω 160mW  533mW
  • Output impedance Balanced 0.9 Ohm
  • Unbalanced 0.45 Ohm
  • Frequency response 2Hz – 200KHz ± 0.5db
  • Input sensitivity 2 VRMS
  • Input impedance 100KOhm
  • Output polarity Selectable by remote control
  • Volume regulator 2 x Burr Brown PGA2310 (180 steps 0,5dB)
  • THD 1% @ 11W
  • S / N Ratio > 100dB
  • Max input voltage 4,4VRMS
  • Max output voltage Balanced 20VRMS
  • Unbalanced 10VRMS
  • Preamplifier
  • Gain 9db
  • Phase inverting / non-inverting switch
  • Outputs 1 balanced XLR
  • 1 unbalanced RCA
  • Connections
  • Analog inputs 1 Balanced XRL line, 4 unbalanced RCA line
  • Digital inputs Installation of (optional) HiDac Mk2 board is
  • required to enable these inputs 1 USB port type
  • “B”, 1 SPDIF coaxial, 1 SPDIF optical

High-quality audiophile headphones, something we all thought belonged to the 70s are now back.
Music fans all over the world are enriching their listening experience by getting rid of earphones and connecting high fidelity headphones to their digital players, and beyond.

With so much material available, it is a pity that there is the possibility of connecting them only to MP3 players, since almost all amps have not had jack sockets for decades.

Pathos laboratories have faced this new challenge by asking themselves: is it possible to compress all our excellent quality and technology in a few cubic centimetres? The result is the brand new Aurium headphone amplifier.

  • Output power : 3.6W @ 16 Ohm, Class A zero feedback
  • Output Inpedance : <0.5 Ohm
  • Output level 7V RMS max
  • Frequency response : 10Hz – 80KHz
  • THD <0.1%
  • Analog inputs : 1 stereo balanced XLR
  • 3 stereo unbalanced RCA line
  • Analog outputs : 1 – XRL TAPE
  • 1 – RCA line TAPE
  • Max inpult level :
  • 4 V RMS unbalance
  • 2 + 3.2 V RMS balance
  • Main voltage 90-250 V 50/60 Hz
  • Power consumption : 30 W
  • Dimensions: size : 20cm (D) x 23cm (W) x 6cm (H)
  • Weight : 3kg

AmpliD is the first of a new line of Pathos digital amplifiers, fully balanced in Class D with an output power of 70 Watts per channel on 8 ohms and 130 watts per channel on 4 ohms with two types of input a stereo balanced XLR and a 1 stereo unbalanced RCA line.

Small in size but generous in power and sound quality, AmpliD is at the forefront of digital amplifiers which should not be underestimated for technological innovation.

  • Type Stereo power amplifier in pure class D, fully balanced
  • Power output 70W @ 8 Ohm
  • 130W @ 4 Ohm
  • Frequency response 1 Hz – 100 KHz
  • THD <0.04%
  • Damping factor 50
  • S / N Ratio 98 dB
  • Input impedance 47 KOhm
  • Analogue inputs 1 stereo balanced XLR & 1 stereo unbalanced RCA line
  • Input sensitivity 8 VRMS Unbalanced
  • 8 + 0.8 VRMS Balanced
  • Output impedance 16 Ohm
  • Gain 29 dB Unbalanced
  • 23 dB Balanced
  • Power consumption min 8W
  • Max 300W
  • <0,5W standby mode
  • size 230mm (D) x 200mm (W) x 70mm (H)
  • Weight (net / packed) 5 Kg / 6Kg

INPOL2 is the latest creation of Pathos, so called because in the Pathos project it presents the second generation of its proprietary INPOL2 technology.

It is also a fully balanced double-mono configuration easily recognizable by style.

INPOL2 which carries a worldwide patent and which has given rise to multi-winning products such as TT and InPower has undergone an advanced evolution.

The INPOL2 is a unique amplifier in many ways and its sound quality will surprise you.

InPol (INmplexer Linear POmpa) is a patented system by Pathos acoustics that has been very successful and has earned many awards.

The InPol devices have a sonic personality not otherwise obtainable thanks to
this particular circuitry, completely balanced in class A that uses a single solid state component in a tracker configuration, with a high current gain and a unitary voltage gain.

The valve amplifier amplifies the input signal voltage and InPol supplies the current for driving the speakers without further amplification; in this way the signal is conveyed by the valves and turns out to be a real copy of the original with all the original quality, purity and harmonic contents.

This technology allows to double the theoretical efficiency of the pure class A from 25% to 50% and to obtain a low output impedance, which is fundamental for the damping coefficient further improved by the double InPol.

  • Type integreted stereo amplifier based on INPOL techonology, operating in pure class A
  • Power output 2 x 45 W @ 8 Ohm
  • Feedback absent
  • Frequency response 10Hz-80KHz +/- 0.5 dB
  • THD <0.05%
  • S / N ratio > 90 dB
  • Input impedance 100 K Ohm
  • Input 5 RCA and
  • 2 balanced XLR
  • Output 1 RCA tape out, 1 pre-amplifier subwoofer, 2 speaker outputs per channel

InPol (INmplexer Linear POmpa) is a patented system by Pathos acoustics that has been very successful and has earned many awards.

The InPol devices have a sonic personality not otherwise obtainable thanks to
this particular circuitry, completely balanced in class A that uses a single solid state component in a tracker configuration, with a high current gain and a unitary voltage gain.

The valve amplifier amplifies the input signal voltage and InPol supplies the current for driving the speakers without further amplification; in this way the signal is conveyed by the valves and turns out to be a real copy of the original with all the original quality, purity and harmonic contents.

This technology allows to double the theoretical efficiency of the pure class A from 25% to 50% and to obtain a low output impedance, which is fundamental for the damping coefficient further improved by the double InPol.

InPolHeritage represents the design legacy of the late co-founder and designer of Pathos, as well as inventor of InPol, ing. Gianni Borinato.

  • Type Reference stereo integrated amplifier Pure class A
  • double INPOL technology – fully balanced-
  • digital Bias / gain set technology
  • tubes 2 x ECC803S tung-sol
  • 2 X 6H30 Sovtek
  • Output power 2 x 80W @ 8 Ohm,
  • Frequency response 2Hz – 200KHz ± 0.5db
  • Max input voltage 10Vrms
  • Input sensitivity 780mVRMS
  • Input impedance 20kohm
  • Volume regulator purely resistive relays
  • THD 1% @ 80W
  • S / N Ratio > 100dB
  • Gain 33 db Unbalanced 39 db Balanced
  • CONNECTIONS
  • Analog inputs 2 balanced XRL line, 4 unbalanced RCA line
  • Digital inputs Installation of optional HiDac Mk2 board is
  • required to enable these inputs
  • 1 USB port type “B”, 1 SPDIF coaxial,
  • 1 SPDIF optical,
  • Outputs 1 Pre out stereo line Unbalanced RCA
  • 1 Pre out stereo line Balanced XLR
  • Output gain selectable in 4 positions
  • Pre-output phase can be selected
  • Dimensions 555mm (D) X 450 (W) X 230mm (H)
  • Net Weight: 58Kg

Current recommended prices in SA